Spore FAQ's (14 entries)

• Q: How do I install Spore doorbell buttons and chimes?
  A: Please see the downloadable installation diagram appropriate to the button or chime you are considering. All Spore products are packaged with installation instructions. Please contact us via  ...
• Q: Are Spore buttons compatible with wireless doorbell systems?
  A: Unfortunately not. Because Spore illuminated buttons require a power source, they must be hardwired.
• Q: My house is brick: Is there any way to install a Spore button?
  A: We recommend using masonry anchors, available at any hardware store, and screwing the button on with the included mounting hardware. In some applications, it might be preferable to use construction ...
• Q: My button will be installed in a location that gets a lot of water. Is there a way to seal the button?
  A: In situations where a button will be directly exposed to the elements, we recommend that you seal the back plate during installation. Simply run a thin bead of silicone adhesive ...
• Q: Can Spore buttons be used in other applications as switches?
  A: Yes. We have seen them used as push buttons for garage doors and as call buttons in a customer-service setting, among other applications. Please contact us for installation guidance and ...
• Q: Can Spore buttons be used as garage door openers?
  A: Yes. Our buttons are low-voltage switches, and they can usually be used in lieu of a standard low-voltage garage door button. Install as recommended by garage door manufacturer, or contact ...
• Q: My Spore button seems to be having some trouble. How can I get it repaired?
  A: Depending on the age and model of your doorbell button, we should be able to help you figure out how to make your button work again. In some cases, we ...
• Q: The resin (plastic part) on my old doorbell button has seen better days. Can I replace it?
  A: Yes, if you have a soft resin button (square, round, or R2 models). Please contact us for a replacement resin at a nominal charge. 
• Q: Can I change the color of my doorbell button by replacing the resin color?
  A: Because our buttons are made with colored LEDs and colored resins, a change in resin color would produce inferior illumination. While technically possible, we do not recommend it.
• Q: I'm having a problem with my Ring chime–help!
  A: First double check to make sure that your chime is installed with the plunger assembly installed horizontally. If you have installed the chime correctly and still cannot get it to ...
• Q: Are Spore products ADA compliant?
  A: All of our stock products meet ADA standards, and we are able to design custom solutions for special projects with ADA specifications in mind.
• Q: Does Spore offer any other custom finishes?
  A: We do, usually subject to minimum orders. Please see our Projects page for further details on how Spore may be able to create a finish or a whole new solution ...
• Q: I have no space for a doorbell button next to my door, any ideas?
  A: Our smallest buttons, the R2 and True, are both small, allowing for installation on narrower doorframes. Still, plenty of homes lack a workable option in the traditional spot beside the ...
• Q: Where can I see a Spore product in person?
  A: Spore products are carried by a number of retailers across the U.S. Please see our dealer list to find the retailer nearest you.